Wireless Signal Transfer/ Repeater 433 Mhz

Specifications

One box can extend remote distance 1,000m (open).
This is 1,000m wireless signal transfer box. It can receive a tiny weak wireless signal and transfer the same signal again automatically, it can extend the remote distance very far 1Km, 3km, 5km, 10km-------100km~1,000km~100,000km.

Technical data:

Input power: DC12v
Static current: ≤10mA
Transfer current: ≤200mA
Frequency: 433MHz
Modulate signal type: ASK
Receiving sensitivity: 103dBm
Transmit power: 600mW

Our wireless remote control system advantage:

I:Wide input voltage: AC90v~AC270v,50Hz/60Hz or DC12v
II:Big load power: 1000~5000w
III:Wide operating temperature range: -60~+500oC
IV:Optional Frequency: 315MHz or 433MHz
V:Coding way: Fix code or intelligent learning code
VI:Application field:

1. Home wireless light control;
2. Home electric appliance control;
3. Agricultual long-distance control;
4. Industrial long-range control;
5. Door wireless open/close,car multi-route alarm;
6. Motor rotation control.

VII:Waterproof: Under water 5~10meters
VIII:Long distance wireless remote: 100m,500m,1000m,2000m,10km

Explanation:

1):Self lock model:

[For example 4ch wireless switch]
Press remoter button A first time,the receiver relay is ON,press remoter button A second time,the receiver relay is OFF,the same as B/C/D. Extend function:When Jumper is OFF possition, when press button A on the transmitter, receiver channel A goes on 2 seconds then goes off automaticaly...Same of channel B/C/D.

Use field: Electric equipment ON/OFF wireless control;garage door open/close,light ON/OFF

2):None lock model:
[For example 4ch wireless switch]
Press remoter button A always,the receiver relay is ON,release button A,the receiver relay is OFF,the same as B/C/D.

Use field: Electric motor rotation positive and negative wireless control

3):Commutative lock model:
[For example 4ch wireless switch]
Press remote button A,the receiver relay A is ON,the relay B/C/D is OFF;
Press remote button B,the receiver relay B is ON,the relay A/C/D is OFF;
Press remote button C,the receiver relay C is ON,the relay A/B/D is OFF;
Press remote button D,the receiver relay D is ON,the relay A/B/C is OFF;