PSTN / GSM / Landline Wireless Burglar Alarm Security System Anti-theft System Home Shop Auto Dial
Feature:
This security alarm system consists of main panel/engine of alarm and various wireless-connected accessories/sensors. If someone enters the defense region illegally, the main engine/panel will activate the loud siren and call the number stored in the main panel notifying the intrusion of the specific zone, so the person can take an immediate action. The system provides an option to monitor the scene form your mobile only.
Specifications:
- 1. GSM frequency: 900/1800 and PSTN Net
- 2. 9 defend zones:6 regular defend zones + 3 temporary defend zones
- 3. All Settings in English.
- 4. Alarm Siren volume control though System Panel.
- 5. Battery backup included in the Main Panel
Package include:
x 1 GSM&PSTN Alarm System
x 2 Wireless PIR Motion Detector
x 3 Wireless Magnetic Door Sensor
x 1 Wireless Smoke Sensor
x 2 Wireless Remote Controller
x 1 High Power Siren (110dB)
x 1 AC-DC Power Adapter (Choices of US, EU adapter)
x 1 English User Manual
x All Batteries & Fixtures Included
SIM card is not provided. You should buy SIM from your local mobile operator.
Verify your mobile operator supports GSM 900/1800 MHz frequencies.
Extremely Powerful Siren! Wear ear protection on initial siren test/install.
System installation
- Brief introduction of system
This security alarm system consists of main panel/engine of alarm and various wireless-connected accessories/sensors. If someone enters the defense region illegally, the main engine/panel will activate the loud siren and call the number stored in the main panel notifying the intrusion of the specific zone, so the person can take an immediate action. The system provides an option to monitor the scene form your mobile only.
Insert the plug of telephone outside line into LINE2 of the main engine and connect LINE1 of the main engine with telephone using attached telephone wire of alarm. Then joint up the power source and warning signal; meanwhile the main engine will give a sound of “B” and light of the power source goes on, which means the main engine starts working.
- Gate magnetism installation
Use the random equipped double-side tape to stick a magnetic stripe on the door and affix the gate magnetic emission box on the doorframe. Pay attention to put the magnetic strip close to the side with indicator lights of the emission box during installation, assuring proper alignment and the smaller distance the better.
- Infrared detector installation
The principle of infrared detectors is to sense people’s movement through sensing infrared signals generated by bodies and the detection range is usually 5-12 meters. Infrared sensor should be installed about 2.2 meters away from ground. Aim straight at the detection ranges. Moreover, the infrared detector be only installed in the room, without facing the sunshine, windows and other places where temperature is easy to change, because the installed location may influence the detection range and accuracy.
Pull SIM card cover behind the host, press SIM card socket with your fingers and push backward, then open the cover of card socket, insert SIM card into the cover based on the notch, keep the notched corner of SIM card in direction of that on board, depress the cover and move forward to lock SIM card.
For more information, please email us at info@v-secur.in. All Emails shall be replied or answered within 48 hours by our trained sales/support executives.
Follow us